How to verify ethernet settings
Verifying the ethernet settings can be useful if you have a suspicion that the settings might be wrong. E.g. if your touchpanel seem to work fine, but it won't respond to ping.
To enter the setup menu you will have to press the touch buttons on the right side of your panel in order: 1, 2, 3, 4, 1, 2, 3, 4. This has to be done within a five second period to work.
When you've entered the setup menu you can click on 'Ethernet Setup'. Note that the design of the setup menu might differ depending on what model you have.
In the Ethernet Setup menu you can verify that the IP address, subnet mask and default router (gateway) is correct by referring to your subnet page or send a picture of the menu to av-styring at usit.
