Assignment 2 - IN5590
The aim for assignment 2 is to learn how to solder and get more experience in CAD and 3D-printing.
Task 1) Solder electronics
In the lab session you can select between the following soldering kits:
We recommend training to solder on Sonens soldering training kits, before starting on the kits mentioned above.
You will get to keep the kit handed out, however you will only get one. If you for some reaseon break the kit, you can get another to be able to finish the assignment, but you will not get to keep it.
We only have 5 of each mentioned kit. The kits will be handed out in the first come first served priority.
Make a GIF that shows the kit working. the GIF should:
- Not be more than 10 seconds long.
- Not be more than 25MB.
- Be 1:1 ratio.
FFmpeg can help you with the enlisted reqiurements. Here is a starting point:
ffmpeg -i IMG_4730.MOV -t 10s -vf 'crop=600:600' -r 15 output/1.gif
Deliverable: 1.gif in the ./output/ directory.
Task 2) Make a custom box for the soldering kit
Make a box that protects the electronics from dust and damage, while preserving the possibility to use the kit as intended. E.g:
- The buttons should be available.
- The LEDs should be visable.
- The battery should be swapable.
You can use both 3D-printing and lasercutting to acheive this.
Add all the SolidWorks files in the output directory.
Take a photo of the final product with the name 2.png.
Deliverable: 2.png and the SolidWorks files in the ./output/ directory.